Instructions for building:
Big Green

---

A ton of votes came in for the green guy last month! Big Green won with 30 votes.  Here he is. *NOTE* The legs must be built before the body.

---

Big Green- Instructions Index
1. Left Arm	2. Right Arm
3. The Legs	4. The Body
5. Transformation

---

The Left Arm

1. Start with an extended peg and the shown "holy" pieces.
2. Add another 5-holed flat piece.
3. Add two 1x1 plates to the 5-holed piece.
4. Make the next component with the pieces shown...
5. And add it to the first component as shown.
6. Put the following pieces together...
7. and connect it to the arm with an extended peg.
8. Use four 1x4 plates and one 1x2 plate to make the shown component.
9. Add it to the arm using the 1x2 piece. You will have to separate the black pieces to squeeze it in.
10. Next, you will need a 2-long axle and a 4-long axle.  Insert them at the shown places along with a 1/2 clip and a white disk.
11. Push the 4-long axle all the way through. Add a 1/2 clip to the 2-long axle.
12. Add a gear to the 4-axle and another disk to the 2-axle. Push the 2-axle through with another axle until it is centered.
13. Make the following component with the parts shown.
14. Add it to the arm as shown.
15. Make the shown component with the shown pieces.
16. Add the shown pieces.
17. Pin the hose in with an axle/peg piece.
18. Add this last component to the arm.

 

Big Green- Instructions Index
1. Left Arm	2. Right Arm
3. The Legs	4. The Body
5. Transformation

---

Index
Main Page	Guest Quarters
The Good: Guardians	Guardian Update!
The Bad: Destrons	Destron Update!
The Ugly: Junkbots	Junkbot Update!
Instructions	Tips and Tricks
The Ultra Throwbots	Links