Instructions for building:
Raven
Raven was the winner on November 1st.
Raven's main body is made from the
"Extreme Team" set #6580: Land Jet 7.


Raven- Instructions Index

1. Arms

2. Legs

3. Body

4. Head
5. Transformation


The Arms


1. Start with a
1x4 plate.  Add a
2x4 and a 2x2
plate as shown.
2. Next, add a
1x4 girder and
a 2x3 slanted
brick.
3. Insert two black
pegs into a jet
engine cylinder...
4. and then attach
the engine
cylinder to the
1x4 girder.
5. Insert a regular
black peg and
an extended peg
to a 1x6 girder.
Attach the girder
as shown.
6. Add a 2x4
plate to the top
and two 1x2
girders to
each side
of the
extended peg.
7. Add two 1x2
plates and two
1x2 slanted
bricks as
shown.
8. Add two 1x6
plates.  Next,
attach two
half-elbow
joints to the end
of each 1x6
plate.
9. Insert 4-long
axles into each
elbow joint.
Connect the
axles with the
3-long
piece shown.
10. Add "gun
barrels" to the
end of each axle.
Also, connect
the elbow joints
with a 1x3 plate.
11. The final
touch is a
1x2 inverted-
slope brick
added to the
1x3 plate.
12. Turn the arm
over.  Combine
a 1x4 plate with
a 3x3 triangle
plate...
and add it to
the under side
of the arm
as shown.

Repeat steps in mirror fashion to create the left arm.


Raven- Instructions Index

1. Arms

2. Legs

3. Body

4. Head
5. Transformation

 
 
Index
Main Page
Guest Quarters
The Good: Guardians
Guardian Update!
The Bad: Destrons
 Destron Update!
The Ugly: Junkbots
Junkbot Update!
Instructions
 Tips and Tricks
The Ultra Throwbots
Links